0.6/1 kV及有以下交連聚乙稀接地供電高壓電力電纜含各種類型型、耐油材料型（耐油材料低壓電力電纜）、耐火型（耐火低壓電力電纜） 0.6/1 kV AND BELOW XLPE INSULATED POWER CABLE (Including the common types, flame retardant types, fire-resistant types)

一、物品優點及使用 Features and uses

熱塑聚乙稀絕緣性用電用電，都具有高物理硬度、耐情況剛度好、優秀的機械特性和耐化工灼傷等格局特征，廠品重輕，格局簡潔明了，運用更方便。本廠品可使用額定輸出功率0.6/1 kV輸變電裝置控制系統，供輸變電裝置能的用法。阻燃等級型電攬的主耍特殊性是電攬材質失火，或失火時延燃僅僅限在肯定區域內，采用來電攬敷設密集度水平比高的發水電站、地鐵口、隨道、多層工程建筑、大興礦山設備機構、采油廠、礦山等領域。耐火型低壓電纜低壓電纜的主耍基本特征是也可以能在合適的程序運行情況下視頻傳輸低壓電纜外，低壓電纜低壓電纜在自燃燃燒時仍能穩定需要周期的合適程序運行。可代替核電建設站、地鐵站、隧道施工、中高層鋼結構建筑等與很安全防火很安全和建筑消防救生關與的場地。

XLPE insulated power cables, which has high mechanical robustness, good environmental stress, excellent electrical properties and chemical resistance characteristics, is simple in structure ,light in weight and convenient in applicable. This product is suitable for rated voltage of 0.6/1 kV power distribution system, for transmission and distribution of electric energy use. The main features of flame retardant cable is not easy to catch fire,or it can confine the fire in some limited area. There fore the cable is applicable to the places where the density of cable laying is high,such as generating stations, subways, tunnels, high-rise buildings, large industrial and mining enterprises, oil field, coal mine and other places. The fire-resistant cable is besides the power transmission under normal condition, can continue operating normally for some time when it catches fire,so it is applicable to the place which is concerned to the fires safety and fire rescue,such as nuclear power plant,subway,tunnel,high-rise building and so on.

二、來執行基準 Standards

GB12706或IEC 60502及相關聯的內部外條件。如：BS、VDE、JIS、AEIC等。 IEC60502 and GB12706 or the relevant domestic and international standards. Such as: BS, VDE, JIS, AEIC and so on.

三、用到性質 Product features

1、電線導體很高合法事情溫度表：順利運轉時90 ℃，虛接時（明顯虛接定期耗時5 s）為250 ℃。 Max. admissible temperature for conductor：90 ℃ under normal running condition，250 ℃ during short circuit（max. duration not exceeding 5s）.

2、電攬的敷設最底濕度為0℃，敷設時比較小可以彎曲的傾斜角為：單芯通信電纜20（D+d）±5 %，mm 多芯電纜電線15（D+d）±5 %，mm 式中：D--電覽的事實外徑，mm d--高壓電纜導體的實踐外徑，mm Minimum temperature of the cable laying 0 ℃, the minimum bending radius when laid: Single-core cable： 20 (D + d) ± 5%, mm Multi-core cable：15 (D + d) ± 5%, mm Where：D--Cable diameter mm of the actual d--mm diameter cable conductor of the actual

四、設備型號查詢及名號（見表4-1） Types of products（Table 4-1）

表4-1 Table 4-1

五、0.6/1 kV熱塑電線電纜格局關心圖 0.6/1 kV XLPE cable schematic 0.6/1 kV化學交聯電纜電線空間架構的特征包擴單芯空間架構的特征、二芯空間架構的特征、三芯空間架構的特征、四芯空間架構的特征（含3＋1空間架構的特征）、五芯空間架構的特征（含4＋1，3＋2空間架構的特征）等，分別見圖1-13。 0.6/1 kV XLPE cable structure comprises a single core, two core, three core, four core (including 3+1 structure ), five core structure(including 4+1,3+2 ), respectively, as shown in Figure 1-13。

六、品牌的組成因素 Product structure parameters 0.6/1 kV熱塑電攬一般機構參數表具有單芯電攬、二芯電攬、三芯電攬、四芯電攬（含3＋1芯電攬）、五芯電攬（含4＋1芯電攬，3＋2芯電攬）等，分別為見表6-1～6-8。 0.6 / 1 kV XLPE cable main structure parameters including single core cable, two core cable, three core cable, four core cable(including 3+1 core cable),five core cable(including 4+1 core cable, 3+2 core cable), respectively, are shown in table 6-1 to 6-8.